Skip to main content

Fingerprint Enrolment

Before employees can clock in and out using the biometric terminal, their fingerprints must be enrolled on the clock and synced to the Belina database.


Prerequisites​

  • Employees must be captured in Belina (Edit → Employee Master)
  • The clock must be connected and registered in Belina
  • Employee names must be synced to the clock (see Sync Employees to Clock)

Sync Employees to Clock​

Upload employee names from Belina to the clock before enrolling fingerprints:

  1. Go to Setup → Clock Users
  2. Click Sync
  3. Under Synchronisation Direction, select From Belina to Clock
  4. Tick the clock(s) to sync to
  5. Click OK

Enrolling Fingerprints on the Clock​

On the terminal:

  1. Press the Menu button (M/)
  2. If Admin Affirm is prompted, the clock administrator must authenticate first
  3. Go to User Mng and press OK
  4. Go to Manage and press OK
  5. Scroll to the employee you want to enrol and press OK
  6. Scroll to Enrol FP and press OK
  7. Capture the fingerprint:
    • Press the employee's finger on the scanner three times when prompted
    • When "Enrolled Successfully" appears, press OK
    • Capture additional fingers (repeat the process)
  8. After capturing all fingers, press Esc, scroll to OK, and save

Recommendation: Capture at least 3 fingers per employee — a thumb, index finger, and one other. This ensures the employee can still clock in if one finger is injured or dirty.


Sync Fingerprints to Belina​

After enrolling fingerprints on the clock, sync them back to the Belina database:

  1. Go to Setup → Clock Users
  2. Click Sync
  3. Under Synchronisation Direction, select From Clock to Belina
  4. Tick the clock(s) to sync from
  5. Click OK

Uploading an Employee Photo​

To add a photo to an employee's Time Control record:

  1. Go to Edit → Employee Master
  2. Open the employee's record
  3. Go to the Photos tab
  4. Click the photo area and browse for the image file
  5. Click OK to save

Troubleshooting Fingerprint Issues​

Employee cannot clock in:

  • Re-enrol the fingerprint — the quality may be poor
  • Enrol additional fingers
  • Check that the employee's record is synced to the clock

Fingerprint not recognised:

  • Clean the fingerprint scanner
  • Try a different finger
  • Re-enrol with a cleaner, drier finger

Deleting a fingerprint: On the clock, go to User Mng → Manage, select the employee, and choose the option to delete the fingerprint.

Was this page helpful?