Downloading Attendance Logs
Attendance records are stored on the biometric terminal and must be downloaded to Belina before processing. There are two methods: via network or via USB flash drive.
Method 1 — Download via Network
This is the recommended method when the clock is connected to your network.
- Go to Process → Clock Administration
- Belina connects to the clock and retrieves the attendance log
- Wait for the attendance records to display
- Click Save to save the records to the database
Method 2 — Download via USB Flash Drive
Use this method when the clock is not connected to the network.
On the clock:
- Insert a USB flash drive into the clock's USB port
- Press the Menu button (M/)
- Place the administrator's finger to unlock the menu
- Using the up/down keys, select Pendrive
- Press OK
- Select Download
- Select Download Attlog
- Press OK when the download is complete
- Press Esc to return to the home screen
In Belina:
- Go to Process → Clock Administration
- Under Source, select Logfile
- Click Get Log
- Browse to your USB flash drive and select the file named
1_attlog.dat - Click Open
- Wait for the attendance records to display
- Click Save
After Downloading
Once the attendance log is saved to the database, run the Calculation Routine to process the attendance data:
Go to Process → Calculation Routine
This calculates hours worked, overtime, short time, and leave for each employee based on their clocking records and shift rotation.
Clearing the Attendance Log
After downloading and saving the attendance log, you can clear it from the clock to free up memory. Only do this after confirming the records have been saved to Belina.
On the clock:
- Go to Menu → Data Mng
- Select Delete Att Log
- Confirm the deletion
Viewing Attendance Records
To view the raw clocking entries in Belina:
Go to View → Terminal Data or View → Clocking Entries
This shows the raw in/out times downloaded from the clock.
Was this page helpful?