Skip to main content

Slots, Shifts & Rotations

Slots, shifts, and rotations define the working time patterns for your employees. Set these up before allocating employees to the Time Control system.


Slots​

A slot is a single time block — a start time and end time for a working period.

Go to Setup → Slots, Shifts & Rotations → Slots tab

  1. Click Insert
  2. Enter a Slot Name (e.g. "Morning", "Afternoon", "Night")
  3. Enter the Start Time — tick Clocking In Required if employees must clock in
  4. Enter the End Time — tick Clocking Out Required if employees must clock out
  5. Configure optional settings:
SettingDescription
Use Range DefaultsApply the default clocking ranges set in the Defaults menu
BreakDuration of the break within this slot
Deduct BreakAutomatically deduct the break from total hours
ColourVisual identifier for this slot
Is ShiftTick if this slot is itself a shift (single-slot shifts)
  1. Click OK to save

Shifts​

A shift is a combination of one or more slots. For example, a "Day Shift" might consist of a Morning slot and an Afternoon slot.

Go to Setup → Slots, Shifts & Rotations → Shifts tab

  1. Click Insert
  2. Enter a Shift Name (e.g. "Day Shift", "Night Shift")
  3. Enter the total number of hours in the shift
  4. Click Apply — your slots appear in the Available Slots column
  5. Allocate slots to the shift:
    • Highlight the slot in the Available Slots column
    • Click the > button to move it to the Shift Slots column
    • Repeat for all slots in this shift
    • To remove a slot, highlight it in Shift Slots and click the < button
  6. Click OK to save

Note: Allocate slots in the order they should occur (e.g. Morning before Afternoon).


Rotations​

A rotation defines how shifts are arranged over a repeating time frame (typically a week).

Go to Setup → Slots, Shifts & Rotations → Rotations tab

  1. Click Insert
  2. Enter a Rotation Name (e.g. "Workshop", "Security Week 1")
  3. Click Apply
  4. The Rotation Base Date is picked up from the Defaults menu — this determines which day of the week the rotation starts
  5. Allocate shifts to the rotation:
    • Highlight the shift to allocate
    • Enter the number of times it should appear
    • Click >> to add it
    • Use the Rest shift for rest days (weekends)
  6. Click OK to save

Allocating Employees to Rotations​

Individual Employee​

  1. Go to Edit → Employee Master
  2. Open the employee's record
  3. Click the T&A Settings tab
  4. Select the rotation from the Shift Rotation dropdown
  5. Click OK

Bulk Allocation​

  1. Go to Edit → Bulk Employee Master Update
  2. Select the rotation from the Shift Rotation dropdown
  3. Tag the employees to update
  4. Click OK

Shift Allocation in Bulk​

For more complex shift allocation (e.g. different employees on different shifts within the same rotation):

Go to Process → Shift Allocation to assign shifts to groups of employees.

Was this page helpful?